HOME / QUARTZ SYSTEMS

Epoxy Quartz System Floors

★ HOW TO INSTALL

How to install an epoxy quartz floor

Built like a flake floor, but broadcast with colored quartz aggregate for a dense, slip-resistant, industrial-grade surface.

100% Solids General Use Flooring Epoxy
1 · Base Coat100% Solids General Use Flooring Epoxy100% solids epoxy, tinted with a pigment pack, over prepped concrete.
Decorative Quartz
2 · Quartz BroadcastDecorative QuartzColored quartz sand broadcast into the wet base.
Polyaspartic 2 Part Flooring System — 90% Solid Non Yellowing Non Fading
3 · Top CoatPolyaspartic 2 Part Flooring System — 90% Solid Non Yellowing Non FadingPolyaspartic sealer over the scraped quartz.
  1. 01
    Prep the slabGrind or acid-etch, fill cracks with PE-85, vacuum.
  2. 02
    Mix the base (A + B)Combine Part A and Part B and mix thoroughly.
  3. 03
    Roll the baseApply an even epoxy base coat across the floor.
  4. 04
    Broadcast the quartzBroadcast quartz into the wet epoxy to refusal for full coverage.
  5. 05
    Cure & scrapeCure, then scrape and vacuum the excess quartz.
  6. 06
    Top coatSeal with polyaspartic. A second coat deepens durability.
★ HOW TO INSTALL

Read these before you pour.

How to Prep Your Concrete for Epoxy Flooring8 MIN
★ SURFACE PREP

How to Prep Your Concrete for Epoxy Flooring

The most important step of any floor coating project. Learn how to clean, profile, and test your concrete so your epoxy or polyaspartic actually sticks — and stays.

Read the guide →
Still have questions?CALL NOW: (737) 377-2519